Peugeot 208 Forums banner
1 - 15 of 15 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi folks I am thinking about changing my alloys from the standard 15 inch alloy that came with the 208 1.2 VTI Active. Was thinking about 17 or 18 inch? Can anyone recomend which would best for my car and what type to get
 

·
Premium Member
Joined
·
172 Posts
personally i don't think 16s do justice to the huge arches, and finding a nice set of wheels in 4x108 fitment gets increasingly difficult each size bigger than 16.

if you can find a second hand set in 17 for good money snap their hand off, or failing that look into adapters for a set of 18s...
 

·
Premium Member
Joined
·
133 Posts
17's, then get a 30mm lowering kit so they fill the arches!

That's my plan anyway - when I have a spare few pennies..........
 

·
Premium Member
Joined
·
270 Posts
Bit of a silly question but how do you remove the centre wheel caps? Can't seem to get them off.
 

·
Premium Member
Joined
·
405 Posts
You don't have to remove the wheel to get the centre cap off, they come off quite easily, had mine changed just the other day as they were badly marked.
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top