Peugeot 208 Forums banner

1st to 2nd gear change problem

5K views 1 reply 2 participants last post by  Nicknack70 
#1 ·
Hi Guys new member 1st time owner. I have noticed in my new car 2019 1.2 Puretech. That when going from 1st to 2nd gear there is always a slight grinding I am unsure as to why this is as it happens even when clutch is all the way to the floor. All other gears are fine. Not sure if this is something that's happening because of the high bite point on the clutch as it seems to either over Rev or pull away slowly when going from standing start as the high bite point is something im not used to. Any help would be appreciated.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top