Peugeot 208 Forums banner

208

  1. ICE
    So I have got a 208 and had it for a couple of weeks and its in car radio thing has started rebooting. The version is SMEG6.1.D.R19 I have managed to download 5.43.A.R2 which I have installed on a FAT32 drive but when I put it into the car it just gives an error about it not having any music on...
  2. Faults and Fixes
    Hi, looking for information on the location of the Oil Level Sensor on a 2012 1.4 208. Is it the one on the back of the block that looks like a pressure sensor? TIA.
  3. Chassis, Wheels, Tyres, Suspension
    Hey everyone. Was changing the pads on the front and it seems there were no top and bottom shims or pad accessories. Should there be any and will any fit as I went with mintex pads. Making noise when going at slower speeds and over small bumps. Any help would be appreciated!
  4. Engine & Drivetrain
    We have a issue sometimes the clutch pedal stays down, thus unable to change gear, if you put your foot under the pedal and pull it up, it goes back to normal and gear selection is normal, but then the problem returns again after 50 or so actuation's of the pedal, there is no evidence of any...
  5. Faults and Fixes
    so i have a 2015 208 with the 82hp 1.2 engine. its only done 28,000 miles but has developed a loud knock/ rattle from underneath/right side of the car. it seems to be worse at low speeds but rough roads cause it the most. i thought it was a broken spring but after checking they all are fine...
  6. 208 GTI
    Hello! First post on here, just looking for some advice really. My turbo has been making a whistle noise when sat at idle and revs to 1.5k. From what I have looked at online and about turbos, in general, it seems to be faulty. I have had it a year and the car is a 65 plate on 29,500 miles and...
  7. How-To
    Hi there, if anyone's considering doing the Facelift rear lights conversion. Just know it's very easy to do and only requires a Flathead screw driver. I didnt have to make any adjustments to the wiring, it was a case of plug in and play. Here's how to do the conversion step by step. Open the...
Top